"Zipppy, Mazdurp builder, Probeski owner and former ricerboy" (zipppyart)
12/14/2015 at 22:40 • Filed to: Project Touring Civic, PTC, Project cars, Honda, JDM AF YO | 3 | 20 |
Hello folks.. I suppose I should get all my info about this build into one large post for future reference.
This should be updated weekly, or whenever something big comes up.
Car has no rust, and it will obviously stay that way, has some minor bodywork to be done otherwise to be in mint condition.
The idea is to make a higher trim Civic Si (SiR for my fellow maple slurpers), on the same level as the Acura EL, with heated seats and a sportier suspension.
Parts I’m using for this build as of right now are as follows:
EL front clip [parts car]
EL leather seats [installed] $80 (need to find Acura EL heated seats module for heated seats)
B18 + transmission from Integra GSR [in talks?] $1000-1500
Prelude or EL steering wheel [parts car]
TEIN coilovers [parts car]
Civic Si (SiR in Canada) wheels [removed for winter]
JDM style, or custom Honda emblem among those lines [on the drawing board?]
Sunroof deflector (yes, it actually helps a lot, and it looks cool) [on hold]*
Short shifter (because why not?)[on hold]*
Strut bar (Also, why not?) [on hold]*
Honda CR-V instrument cluster [parts car]
* Will be bought for $100
Parts car = $500
Dec 13th-15th, 2015 :
Brought the car to get registered, E-tested and safety’ed, got window regulator fixed, Parts car is a hoot, EL rear seats are installed.
Parts car gets fluid changes so it’ll run a bit longer. It’s in great mechanical shape otherwise, and VTEC snaps sharply, as it should.
HFV has no HFV. But somehow has 2 motorcycles
> Zipppy, Mazdurp builder, Probeski owner and former ricerboy
12/14/2015 at 23:34 | 0 |
Why the crv instrument cluster? And will it have a high enough redline for the C1?
Zipppy, Mazdurp builder, Probeski owner and former ricerboy
> HFV has no HFV. But somehow has 2 motorcycles
12/14/2015 at 23:35 | 0 |
redline is 8K on the cluster. the stock one shows the same, but doesnt look ‘premium’.
d15b
> Zipppy, Mazdurp builder, Probeski owner and former ricerboy
12/14/2015 at 23:47 | 0 |
That is all fine and dandy, but what about Sway Bars? Upgrade to the ITR front and rear for
MAX OEM!
BEST FIT.
MUCH TYPE R.
Zipppy, Mazdurp builder, Probeski owner and former ricerboy
> d15b
12/14/2015 at 23:49 | 1 |
if I can find those, then perfect.
d15b
> Zipppy, Mazdurp builder, Probeski owner and former ricerboy
12/14/2015 at 23:51 | 2 |
Don’t forget subframe reinforcement and front and rear LCAs if your car’s LCAs doesn’t have swaybar holes.
HFV has no HFV. But somehow has 2 motorcycles
> Zipppy, Mazdurp builder, Probeski owner and former ricerboy
12/14/2015 at 23:53 | 0 |
this is the only manual CRV cluster I found
versus the GS-R
promoted by the color red
> Zipppy, Mazdurp builder, Probeski owner and former ricerboy
12/15/2015 at 00:10 | 1 |
Nice list! If you’re going to do lots of long highway drives, consider installing the Integra LS 5th gear into the GS-R gearbox. The short gears make the B18C way too high strung.
promoted by the color red
> d15b
12/15/2015 at 00:11 | 0 |
THIS! So many Honda guys learned the hard way why the ITR had so many extra welds...
Zipppy, Mazdurp builder, Probeski owner and former ricerboy
> HFV has no HFV. But somehow has 2 motorcycles
12/15/2015 at 01:17 | 1 |
8200 is the factory redline iirc, should be okay, i dont plan to redline it often.
Zipppy, Mazdurp builder, Probeski owner and former ricerboy
> promoted by the color red
12/15/2015 at 01:18 | 0 |
ah great to know. I might do some trips with it. it will be a “touring” car after all.
valsidalv, reminding you that infiniti is an option
> Zipppy, Mazdurp builder, Probeski owner and former ricerboy
12/15/2015 at 01:50 | 1 |
I look forward to seeing more of this.
Zipppy, Mazdurp builder, Probeski owner and former ricerboy
> valsidalv, reminding you that infiniti is an option
12/15/2015 at 02:04 | 0 |
there will be loads.
HFV has no HFV. But somehow has 2 motorcycles
> Zipppy, Mazdurp builder, Probeski owner and former ricerboy
12/15/2015 at 06:18 | 2 |
Then you’re not Honda-ing properly. hahaha.
d15b
> promoted by the color red
12/15/2015 at 09:36 | 0 |
Absolutely. Those seam welds on the ITR chassis came that way from Honda for a reason.
Because, you know, Honda’s are known for their torque output.
Zipppy, Mazdurp builder, Probeski owner and former ricerboy
> HFV has no HFV. But somehow has 2 motorcycles
12/15/2015 at 11:11 | 0 |
last time the car was kept on the redline, the original engine spun a bearing.
d15b
> Zipppy, Mazdurp builder, Probeski owner and former ricerboy
12/15/2015 at 20:52 | 1 |
You say this now..
d15b
> promoted by the color red
12/15/2015 at 20:54 | 0 |
Seam welds, FTW!
d15b
> Zipppy, Mazdurp builder, Probeski owner and former ricerboy
12/15/2015 at 20:56 | 0 |
Touring? Why not a four-door?
Zipppy, Mazdurp builder, Probeski owner and former ricerboy
> d15b
12/15/2015 at 21:01 | 1 |
Simple reason; It already exists.
d15b
> Zipppy, Mazdurp builder, Probeski owner and former ricerboy
12/15/2015 at 21:12 | 0 |
AHHHH, touche padawan, touche.